Nanohybrid ORMOKER for single layer filling technology in posterior areas. Сase report.

Authors

  • Юрген Манхарт

DOI:

https://doi.org/10.33295/1992-576X-2019-3-7

Keywords:

технология пломбирования в один слой, ормокеры, композиты, прямые реставрации, постериальная область, адгезивные реставрации.

Abstract

Прямые композитные реставрации на задних зубах являются частью стандартного набора методик лечения в современной стоматологии. Множество клинических исследований доказали превосходные характеристики данной формы реставрации, выполняемой в несущих нагрузку жевательных зубах в постериальной области. Данная процедура обычно проводится с помощью детально продуманной методики наслаивания. Помимо широких возможностей, которыми обладают высокоэстетичные композитные материалы при применении многоцветных и многослойных методик, также существует большой спрос на самые простые и быстрые в использовании, т. е. более экономичные материалы на композитной основе для постериальных зубов. Этот спрос можно удовлетворить, предложив наиболее популярные композиты с увеличенной глубиной отверждения (композиты, пломбирующие в один слой).

Author Biography

Юрген Манхарт

Prof. Dr. Юрген Манхарт,
Polyclinic for Conservative Dentistry and Periodontology, Goethestrasse 70, 80336, Munchen, Germany.
E-mail: manhart@manhart.com.
www.manhart.com.
www.dental.education.

References

1. Burke FJ, Palin WM, James A, Mackenzie L, Sands P. The current status of materials
for posterior kompozit restaurations: the advent of low shrink. Dent Update. 2009; 36:
401–402
2. Burtscher P. Von geschichteten Inkrementen zur Vier-Millimeter-Bulk-Fill-Technik –
Anforderungen an Komposit und Lichthärtung. DZW Die Zahnarzt Woche. – 2011; Ausgabe
39/2011: 6–8
3. Caughman WF, Caughman GB, Shiflett RA, Rueggeberg F, Schuster GS. Correlation
of cytotoxicity, filler loading and curing time of dental kompozits. Biomaterials. – 1991;
12: 737–740
4. Ciriminna R, Fidalgo A, Pandarus V, Beland F, Ilharco LM, Pagliaro M. The sol-gel
route to advanced silica-based materials and recent applications. Chem Rev. – 2013; 113:
6592–6620
5. Czasch P, Ilie N. In vitro comparison of mechanical properties and degree of cure
of bulk fill kompozits. Clin Oral Investig. – 2013; 17: 227–235
6. Ferracane JL. Resin kompozit – state of the art. Dent Mater. – 2011; 27: 29–38
7. Ferracane JL, Greener EH. The effect of resin formulation on the degree of conversion
and mechanical properties of dental restorative resins. J Biomed Mater Res. – 1986;
20: 121–131
8. Finan L, Palin WM, Moskwa N, McGinley EL, Fleming GJ. The influence of irradiation
potential on the degree of conversion and mechanical properties of two bulk-fill flowable
RBC base materials. Dent Mater. – 2013; 29: 906–912
9. Frankenberger R, Biffar R, Fecht G, Tietze P, Rosenbaum F. Die richtige Basisversorgung
– Expertenzirkel. Dental Magazin. – 2012; 30: 12–24
10. Frankenberger R, Garcia-Godoy F, Kramer N. Clinical Performance of Viscous
Glass Ionomer Cement in Posterior Cavities over Two Years. Int J Dent. – 2009; Article ID:
781462, doi:781410.781155/782009/781462
11. Frankenberger R, Vosen V, Krämer N, Roggendorf M. Bulk-Fill-Komposite: Mit
dicken Schichten einfacher zum Erfolg? Quintessenz. – 2012; 65: 579–584
12. Greiwe K, Schottner G. ORMOCERe: Eine neue Werkstoffklasse. FhG-Berichte. –
1990; 2: 64–67
13. Guggenberger R, Weinmann W. Exploring beyond methacrylates. American Journal
of Stomatology. – 2000; 13: 82–84
14. Hickel R. Neueste Komposite – viele Behauptungen. BZB Bayerisches Zahnärzteblatt.
– 2012; 49: 50–53
15. Hickel R, Dasch W, Janda R, Tyas M, Anusavice K. New direct restorative materials.
FDI Commission Project. Int Dent J. – 1998; 48: 3–16
16. Hickel R, Ernst CP, Haller B et al. Direkte Kompositrestaurationen im Seitenzahnbereich
– Indikation und Lebensdauer. Gemeinsame Stellungnahme der Deutschen
Gesellschaft für Zahnerhaltung (DGZ) und der Deutschen Gesellschaft für Zahn-, Mundund
Kieferheilkunde (DGZMK) aus dem Jahr 2005. Deutsche Zahnärztliche Zeitschrift. –
2005; 60: 543–545
17. Ilie N, Hickel R. Silorane-based dental kompozit: behavior and abilities. Dent Mater
J. – 2006; 25: 445–454
18. Ilie N, Hickel R. Macro-, micro- and nano-mechanical investigations on silorane,
and methacrylate-based kompozits. Dent Mater. – 2009; 25: 810–819
19. Ilie N, Hickel R. Resin kompozit restorative materials. Aust Dent J. – 2011; 56
Suppl 1: 59–66
20. Ilie N, Stawarczyk B. Bulk-Fill-Komposite: neue Entwicklungen oder doch
herkömmliche Komposite? ZMK. – 2014; 30: 90–97
21. Kunzelmann KH. Komposite – komplexe Wunder moderner Dentaltechnologie.
Teil 1: Füllkörpertechnologie. Ästhetische Zahnmedizin. – 2007; 10: 14–24
22. Kunzelmann KH. Komposite – komplexe Wunder moderner Dentaltechnologie.
Teil 2: Matrixchemie. Ästhetische Zahnmedizin. – 2008; 11: 22–35
23. Lien W, Vandewalle KS. Physical properties of a new silorane-based restorative
system. Dent Mater. – 2010; 26: 337–344
24. Lohbauer U. Dental Glass Ionomer Cements as Permanent Filling Materials? –
Properties, Limitations и Future Trends. Materials. – 2010; 3: 76–96
25. Manhart J. Charakterisierung direkter zahnärztlicher Füllungsmaterialien für den
Seitenzahnbereich. Alternativen zum Amalgam? Quintessenz. – 2006; 57: 465–481
26. Manhart J. Direkte Komposit restauration: Frontzahnästhetik in Perfektion. ZWP
Zahnarzt-Wirtschaft-Praxis. – 2009; 15: 42–50
27. Manhart J. Neues Konzept zum Ersatz von Dentin in der kompositbasierten Seitenzahnversorgung.
ZWR Das Deutsche Zahnärzteblatt. – 2010; 119: 118–125
28. Manhart J. Muss es immer Kaviar sein? – Die Frage nach dem Aufwand für Komposite
im Seitenzahnbereich. ZMK. – 2011; 27: 10–15
29. Manhart J, Chen H, Hamm G, Hickel R. Review of the clinical survival of direct and
indirect restaurations in posterior teeth of the permanent dentition. Oper Dent. – 2004; 29:
481–508
30. Manhart J, Chen HY, Hickel R. Three-year results of a randomized controlled clinical
trial of the posterior kompozit QuiXfil in class I and II cavities. Clin Oral Investig. – 2009;
13: 301–307
31. Manhart J, Hollwich B, Mehl A, Kunzelmann KH, Hickel R. Randqualität von Ormocer-
und Kompositfüllungen in Klasse-II-Kavitäten nach künstlicher Alterung. Deutsche Zahnärztliche
Zeitschrift. – 1999; 54: 89–95
32. Manhart J, Kunzelmann KH, Chen HY, Hickel R. Mechanical properties and wear
behavior of light-cured packable kompozit resins. Dental Materials. – 2000; 16: 33–40
33. Moszner N, Gianasmidis A, Klapdohr S, Fischer UK, Rheinberger V. Sol-gel materials
2. Light-curing dental kompozits based on Ормокеры of cross-linking alkoxysilane
methacrylates and further nano-components. Dent Mater. – 2008; 24: 851–856
34. Moszner N, Völkel T, Cramer von Clausbruch S, Geiter E, Batliner N, Rheinberger
V. Sol-Gel Materials, 1. Synthesis и Hydrolytic Condensation of New Cross-Linking Alkoxysilane
Methacrylates and Light-Curing Kompozits Based upon the Condensates. Macromol
Mater Eng. – 2002; 287: 339–347
35. Peutzfeldt A. Resin kompozits in stomatology: the monomer systems. Eur J Oral
Sci. – 1997; 105: 97–116
36. Schmidt H, Wolter H. Оrganykally modified ceramics and their applications. Journal
of Non-Crystalline Solids. – 1990; 121: 428–435
37. Tauböck TT. Bulk-Fill-Komposite. Wird die Füllungstherapie einfacher, schneller
und erfolgreicher? Teamwork J Cont Dent Educ. – 2013; 16: 318–323
38. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental kompozits. Dent
Mater. – 2005; 21: 68–74
39. Wolter H. Kompakte Ormocere und Ormocer-Komposite. Fraunhofer-Institut für
Silikatforschung (ISC) – Tätigkeitsbericht. – 1995; 56–63
40. Wolter H, Schmidt H. Isolationsschichten auf der Grundlage organisch modifizierter
Keramiken und deren Applikationen [Insulation layers on base of organik modified ceramics
and their application]. DVS Berichte. – 1990; 129: 80–85
41. Wolter H, Storch W. Neuartige Silanklasse – Werkstoffe für Formkörper. ISCTätigkeitsbericht.
– 1992 1992; 61–72
42. Wolter H, Storch W, Ott H. Dental filling materials (posterior kompozits) based on
inоrganics/organics cjpolimers (ORMOCERs). MACRO AKRON. – 1994; 503
43. Wolter H, Storch W, Ott H. New inоrganics/organics cjpolimers (ORMOCERs)
for dental applications. Materials Research Society Symposia Proceedings. – 1994; 346:
143–149
44. Wolter H, Storch W, Schmitzer S et al. Neue biokompatible Dentalwerkstoffe auf
Ormocer-Basis. In: Planck H, Stallforth H (Hrsg) Tagungsband Werkstoffwoche 1998, Band 4,
Symposium 4: Werkstoffe für die Medizintechnik. Weinheim: Wiley VCH, 1998, 245–248
45. Zimmerli B, Strub M, Jeger F, Stadler O, Lussi A. Kompozit materials: composition,
properties and clinical applications. A literature review. Schweiz Monatsschr Zahnmed. –
2010; 120: 972–986

Published

2019-10-10

Issue

Section

PREVENTIVE DENTISTRY